keskiviikko 22. tammikuuta 2014

Western 8600 Backhoe - LÄNNEN 8600 yhdistelmä Osa # 1


Lännen MCE on Pohjois-Euroopan johtava maa-, vesi- ja ympäristörakentamiseen erikoistuneiden koneiden, laitteiden ja palvelujen tuottaja. Viennin osuus on ollut viime vuosina jatkuvassa nousussa uusien markkina-alueiden myötä ollen nyt yli 60% liikevaihdosta.
                      
Lännen Tractors on osa Lännen Mobile Construction Equipment (Lännen MCE) -ryhmää, johon kuuluu suomalainen yhtiö Lännen Tractors Oy ja ruotsalaiset yhtiöt Lännen Tractors AB Jönköpingissä ja Lundberg Hymas AB Skellefteåssa.




Lännen Tractors Oy valmistaa Lännen-pyöräkuormainkaivureita ja Vesimestari-vesirakennuskoneita. Yhtiö markkinoi Suomessa Lännen Lundberg-monitoimikoneita ja Ljungby-pyöräkuormaajia. Lännen-pyöräkuormainkaivureita markkinoidaan yli 10 maassa Euroopassa. Lundberg Hymas AB valmistaa Ruotsin Skellefteåssa Lännen Lundberg-monitoimikoneita. 
Lännen Tractors panostaa hyvään asiakas-, varaosa- ja huoltopalveluun valtakunnallisesti Lännen Center -toimipisteiden (Espoo, Tampere, Lappeenranta, Oulu), alueellisen jälleenmyyjän (Turku), AGCO Suomi Oy:n varaosapisteiden sekä kattavan huoltoverkoston kautta.



                                                                One machine, many work
                                                      Forget so many the various machines
Comparison the mass transfer of 50m3

Lännen Tractors develops and manufactures machines for construction and utility machines for demanding applications under the trade name Lännen. 
The location in the centre of the main marketing areas in North Europe ensures the good knowledge of local conditions. 
Thus the company has acquired the skills required for production of machines for demanding conditions, in accordance with customer requirements. 
The central location of the spare parts storage at the factory warrants the prompt spare parts deliveries.

The company also manufactures machinery for waterway construction under the trade name Watermaster.

Lännen Tractors has expanded its activities to multi-purpose machines when Lännen Tractors acquired the entire share capital of the Swedish company Lundberg Hymas AB.      
                        
               
                      
Koneen ehdottomia etuja on ajo myös kaivuu asennosta jossa kaikki samat toiminnot.

Tämä on ollut ruotsalaisten ja suomalaisten koneen rakentajien kehittämä ja suosima järjestelmä, josta se hyvin hitaasti on alkanut levitä myös muualle, eurooppaan asti.

Monet tänne tuodut uudet koneet on varustettu yli kolmenkymmenen vuoden ajan takana olevin ajolaittein, siis ne koneet joihin tämä mahdollisuus on voitu tehdä kohtuudella.

Jo yli neljäkymmentä vuotta näitä traktorikaivureita on voinut ohjata kaivuu asennosta ja takana on ollut kytkin ja jalka kaasuvipu koneen siirtämiseen ja kaivutyön tekemisen yksinkertaiseksi, joka myös auttaa työssä liikkumista pehmeässä metsässä ja suolla.

Suuri maavara, alustan panssarointi, helppo huolto, erittäin kapeat kaivurin puomit, hyvä näkyvyys kaivukohde, kaivurin erittäin voimakkaat kääntö sylinterit, joissa on suuri teho.
Erinomainen ja hiljainen ohjaamo, josta upeat näköalat jokapuolelle.

                      

                      

The machine has absolute advantages of driving the digging position, with all the same functions. 

More than forty year these backhoe excavator is able to control the position, and has been to driver switch pedal in the back, like of the foot throttle lever. 
The forest ditches helps advance and developed this systems.
Hand throttle its alvays right side, if driver look ahead.

This the only Finnish and Swedish builders Backhoe Loader developed and favored by the system, which it very slowly has begun to spread to other parts. 
Mostly all imported brand-new are to equipped digger driver to behind driving methods, as early as over thirty years, if these system can make, or factor give permit.

You can move machine and make the job simple and easy, which also helps machine work movement of the soft forest and swamp, cause wheel draw same time, when you to push diggers bucket

High ground clearance, bottom chassis armor, easy to maintain, very narrow excavator booms, a good view of the target excavation, excavator with a very strong swing is the cylinders with powerful and efficiency. 
Excellent and quiet cabin with spectacular views from every side.

                     

                      
                            Lännen 8800GLT trailer load capacity of 22 tons

Specifications 8600Ge
Engine and auxiliary equipment
Type 4-cylinder, 4-stroke, turbo-charged Commonrail Diesel engine with intercooler, meets emission requirements according to Stage 3A 97/68/EC
Model SisuDiesel 44 CWA
Max. Output 99 (135) kW (hp), 1800 rpm
Max. Torque 600 Nm, 1200…1500 rpm
Displacement 4,4 l
SisuTronic electronic engine control system, CAN bus for data transfer
Visco-clutch for cooler fan
Starter 4,0 KW
Alternator with multi-groove flat belt with automatic tightening 24 V / 100 A
Batteries 2 x 145 Ah
Electric engine heater 1100 W

Driver's cabin
Rops- ja Fops -tested
Noise level LpA (measured values 69 / 99 dB
Thanks to the unobstructed view, flexible and precise control of different work stages
Ergonomic design of the cabin helps the operator work longer without getting tired
Operating controls and the most often used functions are located in the control levers
Efficient cabin heating and air conditioning, which is a standard feature
Hydraulic 2-stage tipping of the cabin with manually operated pump

Front loader
Mechanical self-level feature, position indicator for bucket
Mechanical BM-quick-hitch
Ergonomic pilot-pressure operated multi-purpose joystick at the seat
Float-position for lifting, electric control on the control lever
Loading height (bottom of the bucket on a level) 3450 mm
Lifting force in the lower position 6420 kp (7030 kp)
Lifting force in the upper position 4180 kp (4590 kp)
Break-out force at the cutting edge of the bucket 6120 kp
Dumb reach 850 mm
Bucket recommendation (depending on density of the material being loaded SAE 1100 - 1500l

Backhoe
Knucle boom, proportional pilot control in the joystick
Universal hydraulics, proportional pilot control in the joystick
Pins and bushings with special hardening, spherical bearings on cylinders
Option for quick-hitch in the backhoe
Pressure of the operating hydraulics (with turbo-hydraulics) 245 bar
Digging reach 6410 mm
Digging depth 4500 mm
Loading height, bottom of the bucket on a level (depression of tyre 0) 3880 mm
Swing angle of the backhoe 180 + 54˚
Pressure of the operating hydraulics (with turbo-hydraulics) 1630 kp (1785 kp)
Digging force at the end of the dipper stick 5910 kp (6420 kp)
Break-out force of the bucket 71 KNm (76 kNm)
Swing torque 4320 kpm
Recommended bucket volume SAE 410l

Transmission
Hydrostatic transmission Sauer Danfoss
Variable displacement axial piston pump Sauer, flow 115 cm3/r
Variable displacement axial piston pump Sauer, displacement 160 cm3/r
Control system for the drive and operating hydraulics developed by Lännen
Travel speed adjuster - inching with accelerator pedal
Max. speed adjustment also directly from the screen
Feedback from the HSD drive automatics to the diesel engine

Gearbox
Two-speed gearbox Dana
Electro-hydraulic gear-shift
Speed forward/reverse
1.gear 0…14,6 km/h
2.gear 0…45 km/h
Max. Pulling force 85 kN

Axles
Strong driving axles both in the fromt and rear Dana
Flexible front axle oscillation with large angle ±12˚
Automatic friction locs in differentials in the fromt and rear
Automatic locking of oscillation with load-sensing

Wheels
Large wheels in the fromt and rear 18.4B30 159B Nokian TRI / TL -Industrial
Tread / outside width 2020 / 2487
Rim DW16-30, reinforced by flanging, valve guards
Front mudguards - attached to front axle

Steering
Hydrostatic LS-Orbitrol steering with revolution memory
Flow from the operating hydraulics pump
Extremely large turning angle of the articulated joint ±42˚
Turning radius to wheel/bucket 4,9 / 5,3 m
Proportional steering with roller switch also on the left control lever

Brakes
Oil pressure operated brakes in oil bath on front and rear axle
Operating controls also in digging position
Parking brake; disc brake on the cardan shaft, electric control from the control panel
Traction release combined with handbrake
Digging brake (optional)

Operating hydraulics
Load-sensing system
Pump; Axial piston pump with variable displacement, saves in the operation costs
Practical automatic speed control with revolution memory
Max. flow 200 l/min, 2000 rpm
Max. operating pressure/max. operating pressure with turbo-hydraulics (optional) 225 bar (245 bar)
Hydraulic oil cooler
Hydraulic pilot control
Electric pilot control for the hydraulic system
Standard control levers of the Lännen 8600 Ge with electric pilot control can be replaced by minilever

Fluid volumes
Fuel Tank 150 l
Hydraulic oli tank 140 / 210 l
Motor oil 10 l
Cooling fluid 19 l
Axels (4x2,6) + (2x17,5) l
Gearbox 3,0

Optional
Lännen- Wheel Loader Bachhoe manufacturing is always based on the customers order, concerning the customers individual needs
Main dimensions
Length (transport) / width 8550 / 2480 mm
Height cabin/backhoe 3090 / 4340 mm
Ground clearance 500 mm
Weight distribution 4100 / 7400 kg
Operating weight 11 500 kg

                                            Finally, the obligatory musical blast. 
                                                          West's model.
                                                           The western way!
                                                     Lopuksi pakollinen musiikkipläjäys lännen malliin
                                                            Lännen tie  (finnis version).
                                                                       

Ei kommentteja:

Lähetä kommentti